background image

 

IP TELEPHONE SET 

 

 

28

To check the Remote Phone Book via Phone interface: 
1)  Press the Dir->Remote phonebook. 
2)  Enter to the Remote Group page, choose a special one, and press the Enter hot key, 

it will go to the corresponding URL address to download the contact information for 
you. 

 

Note: 

1. This IP phone can support 5 remote phone books at most.   
2. Every contact in the remote phone book can set several phone numbers.

 

Broadsoft 

Broadsoft phone book is the same as the Remote Phone Book. This feature allows you to 
download contact list from the server. Input the phonebook URL, port, username, 
password and rename the phonebook 

 

 

LDAP 

LDAP can support these functions: 

1. Search the contact: Press the DSSkey which is set up as LDAP, input a number or 
letter in the new interface, the phone will search the contact in LDAP server which 
following the Certain rules, and show it in the LCD, user can choose the contact to call 
out. 

2. Search the incoming call: the phone will search the local directory when there is a 
coming call. If they can’t find the contact in the local directory, it will search them through 
LDAP server, and show the contact name in the LCD. The LDAP Lookup For Incoming 
Call option can be configured to enable or disable this function via web interface.   

Summary of Contents for ip112







































































































Reviews: