Karel GT20, Technical Reference And User'S Manual

Page: 15 / 17

TECHNICAL REFERENCE AND USER’S GUIDE REV A
GSM GATEWAY
21
Call Initiation Period:
In order to make a call over GT20/GT10, the number to be called is dialed. If no other
number is dialed within a certain period, GT20/GT10 initiates the call by using the digits
dialed so far. That period can be changed through this program.
Parameters
P : 1..9 Period to wait for transmitting the dialed digits (sec.)
Default
P = 3
GSM Speed Dial Memory:
A phone book can be created in the non-volatile memory of GT20/GT10 and short-coded
calls can be made over that phone book.
Parameters
P : 01..64 Phone book index
N : Telephone number with at most 11 digits
Notes:
• If the number of digits is less than 11, then the end of the number can be indicated
by the key # .
• As an example:
By dialing 843 07 8560202 # , 8560202 can be entered into memory field 07.
In order to call this number:
7 At the end of the call initiation period, GT20/GT10 initiates the call from the
memory.
7 # When # is dialed GT20/GT10 initiates the call from the memory.
Erasing Numbers From The GSM Speed Dial Memory:
In order to erase a number from the GT20/GT10 memory, this program can be used.
Parameters
P : 01..64 Phone book index
842 P
843 P N
844 P
Incoming Voice Level:
The incoming voice level can be adjusted for the calls made over GT20/GT10.
Parameters
P : 0..4 Incoming voice level (0 is the minimum level)
Default
P = 2
Outgoing Voice Level:
The outgoing voice level can be adjusted for the calls made over GT20/GT10.
Parameters
P : 0..7 Outgoing voice level (0 is the minimum level)
Default
P = 3
Unconditional Call Forwarding:
This program activates the feature that the entire incoming calls over the GSM module
on GT20/GT10 are forwarded to another number.
Parameters
P : 0 Forwarding is not active.
: 1 Forwarding is active.
Default
P = 0
Number Entry For Unconditional Call Forwarding:
This program stores the number to which the calls coming over the GSM module on
GT20/GT10 are forwarded.
Parameters
P : Telephone number with at most 16 digits
Notes:
• If the number of digits is less than 16, then the end of the number can be indicated
by the key # .
• Forwarding is automatically activated when the storing is performed.
Number Erasure For Unconditional Call Forwarding:
This program erases the number to which the calls coming over the GSM module on
GT20/GT10 are forwarded.
22
851 P
856 P
896 P
897 P
898