One of the features in the list is selected by using left and right navigation keys. Then, on
‘DSS Key:’ field, user should press the key for a short time to select the first function or a
long time to select the second function of the key. The assignment will be confirmed by
pressing ‘OK’.
Call Diversion;
If this key is pressed and number of an extension is entered, forwarding to
that extension is actualized and then red LED lights. If it is pressed again, the forwarding is
cancelled and the LED goes out.
Change Label;
This key is used to display the second function of the keys on the LCD of
the DSS3L-24 module for a short time. (This key is not usable for DSS3K-24 module.)
Since the Change Label is a special key, it has only one function so user can not program
any feature for the other function of the key. While programming this key, if there is another
feature assigned before it will be deleted and new feature will be programmed.
Do Not Disturb;
While the telephone is on hook, if this key is pressed it puts the extension
into the “Do Not Disturb” mode. In that case, telephone rings once when the extension is
called. If it is pressed again the “Do Not Disturb” service is cancelled. The corresponding
red LED is on while it is active, and goes out when it is cancelled.
Night Mode;
The used mode (Day or Night) can be seen through the LED of the key. It
can be employed only through the telephone that has been defined as the operator. The
phone puts the system into the Night Mode when this key is pressed by the operator. The
red LED turns on if night mode is active. If the key is pressed by the operator again it puts
the system back into the Day Mode and the LED goes out.
Call Pick Up;
When a user is busy or in a conversation, the incoming internal or external
call can be taken by pressing this key and at that time the first line is parked.
Call Back;
If a called extension is busy or not answering and if busy tone is received upon
attempting to access a line, then that extension/line is called back by pressing this key and
the appropriate red LED lights. In order to cancel the call back operation, the key is
pressed again while the telephone is on hook and the LED goes out.
Phone Lock;
If this key is pressed and a password is entered, the telephone will be closed
for external calls. The telephone will be opened for external calls again, if the procedure is
repeated. The corresponding red LED is on while the telephone is locked and goes out
when it is unlocked.
Feature Code
By this menu, user can assign any of the feature codes of the system to DSS keys. It
enables user to use system features with pressing a single key.
Private Pool
As you can program the most frequently used 9 numbers to the private pool of your
telephone, you can program this private pool numbers to any of the programmable DSS
keys.
