PROGRAMMING
Since the programming of DSS keys are directly made through the connected NT digital
phone, there is no need to make any programming over the DSS module. All required
settings are made through the NT Series Telephone Sets. The DSS Settings menu of
telephone is used for this purpose.
Sub menus of DSS Settings are listed below:
•
Key Programming
•
Auto Settings
•
Delete Key
•
Delete All Keys
KEY PROGRAMMING
There are totally 24 programmable keys and the assignments of programs are made
through this menu. If the desired key is pressed for along time, the second function of the
key can be used for the programming, so totally 48 functions can be programmed to these
24 keys. Keys become active after programming is done. The functions that can be
assigned to keys are explained below.
Extension
User can reach an extension, which user call frequently, through a single key by
programming the extensions number on the key. After entering the extension number,
select the key you desired to program. An extension number can be assigned to more than
one key.
After the programming mode is exited and this key is pressed, the extension that has been
stored on the key can be directly called. In addition to the calling function, status of the
extension, which was programmed as the first function of a programmable key, can be
viewed by the LED of the key and also can be viewed on LCD screen of DSS3L-24
module.
Line
It enables you to program a specific line number on a key. By pressing that key, you can
access the line that has been programmed on the key and make a call (provided that it is
vacant) and you can access that number by a single key.
A line can be assigned to more than one key. After the programming mode has been
exited, upon pressing those keys, it is possible to access the programmed lines, without
pressing 9. The status of the line (that was programmed as the first function of a key) can
be viewed by the LED of the key and also can be viewed on LCD screen of the DSS3L-24
module.
