
DS200 User’s Guide
DS200 User’s Guide
DS200 User’s Guide
DS200 User’s Guide
V003. 09.09.2002
C-53
Message Waiting on the Operator (740):
Message Waiting on the Operator (740):
Message Waiting on the Operator (740):
Message Waiting on the Operator (740):
While there is a message or a note for an extension, the operator may notify her/him, by
making use of this service.
In order to activate the wait
In order to activate the wait
In order to activate the wait
In order to activate the waiting message:
ing message:
ing message:
ing message:
H
Lift the handset and hear the internal dial tone.
740
Dial 740.
B
Dial the extension number.
F
Hear the dial tone.
Notes:
Notes:
Notes:
Notes:
1. The telephone of the extension is rung by the exchange for seven seconds immediately, if
the extension is available, or five seconds after s/he hangs up, if the extension is busy at
that moment, and the “Message.” lamp of the telephone set gets on. This operation is
repeated each time the telephone is hanged up and picked up. It is cancelled when the
operator is called.
2. If the extension receives a call request during the message call, then the message call is
cancelled and incoming call mode is activated.
3. The operator cannot deactivate the waiting message feature s/he has activated by
her/himself. The extension must call the operator for that.
4. This service applies only for the telephone sets with the Message lamp.
Restoring the System Parameters (744):
Restoring the System Parameters (744):
Restoring the System Parameters (744):
Restoring the System Parameters (744):
If unexpected changes are observed with the operation of the exchange, and if those are not
related to hardware problems, then the system parameters can be updated and the
exchange recovers its normal operation state through this feature.
In order to restore the system parameters:
In order to restore the system parameters:
In order to restore the system parameters:
In order to restore the system parameters:
H
Lift the handset and hear the internal dial tone.
744
Dial 744.
GC
Replace the handset and wait for about one minute for the
system to reload its entire parameters.