KARE design Tavola Office, Assembly And Operating Instruction

Page: 23 / 37

1.4 FCC Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
1.5 User Information
When customer support is required the
operator may ask for information stated on the
product label. The product label is located on
the house of the motor on one of the columns.
1.6 Before You Start
Check for and remove obstacles in path of the desk top. Before first use, the control
unit must register the lowest point of elevation. Do reset as section 4.2. Under normal
conditions the system communicates internally and knows the position of each column.
If there are differences in column height, please do a manual reset as listed in section 4.2.