Operation of buttons
4
MODE
FAN
TEMP
SLEEP
ON/OFF
SILENCE
FP
TIMER
ON
TIMER
OFF
1
2
4
3
7
5
6
10
12
11
13
14
SWING DIRECT
LED FOLLOW
ME
TURBO SELF
CLEAN
UP Button (
)
Push this button to increase the indoor
temperature setting in 1ºF increments to 86ºF.
DOWN Button (
)
Push this button to decrease the indoor
temperature setting in 1ºF increments to 62ºF.
NOTE:
Temperature control is not available in
FAN mode.
NOTE:
Press and hold UP and DOWN buttons
together for 3 seconds to alternate the
temperature display between the ºF and
ºC scale.
SILENCE/FP Button
• Activate/Disable Silence function. Press button
for more than 2 seconds and the FP function
will be activated. Pressing again for 2 seconds
disables the FP function.
• When the Silence function is activated, the
compressor will operate at low frequency and
the indoor unit will blow at a faint breeze,
which will reduce noise to the lowest level,
creating a quiet and comfortable room. Due to
low frequency operation of compressor, it may
result in insufficient cooling and heating output.
• The FP function can only be activated during
the heating operation (only when the setting
mode is HEAT). The unit will operate at a
setting temperature of 46ºF. The display
window of indoor unit will display ‘FP’.
Pressing the ON/OFF, SLEEP, FP, MODE,
FAN SPEED, UP or DOWN while operating will
cancel the FP function.
TIMER ON Button
Press the button to initiate the auto-on time
sequence. Each press of the button will
increase the auto-time setting in 30 minute
increments. When the setting time displays
10.0, each press of the button will increase the
auto-time setting in 60 minute increments. To
cancel the auto-time program, simply adjust
the auto-on time to 0.0.
