Kärcher WD 5.200 MP, Quick Start Manual

Page: 7 / 18

English
7
 This accessory compartment allows the
storage of the suction pipes or other ac-
cessories.
(see description / illustration )
 The cartridge filter must always be in-
stalled - with wet and dry vacuuming.
Note : Let the wet cartridge filter dry pri-
or to using it for dry vacuuming.
(see description / illustration )
 Slide the suction hose into the connec-
tion, it will lock into place.
(see description / illustration )
Note : In order to disconnect it, push
down with your thumb and pull the suc-
tion hose out.
 Connect both suction pipes and con-
nect them to the suction hose.
(see description / illustration )

Use the appropriate insert for vacuum-
ing on hard surfaces and carpets.
Hard surfaces, wet vacuuming : Use
the insert with 2 rubber lips.
Hard surfaces, dry vacuuming : Use
the insert with 2 bristles.
Carpets, wet and dry vacuuming :
Work without an insert.
 For edges, joints, heaters and hard to
reach locations.
 To connect the suction hose with an
electric tool.
(see description / illustration )
몇
Always work with an inserted car-
tridge filter - during wet as well as
dry vacuum cleaning!
 Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
 Illustration
Insert and lock the appliance head.
 Illustration
Connect accessories.
 Illustration
Plug in the main plug.
 Illustration
Turn on the machine.
몇
Work only with a dry cartridge filter!
 Caution : Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
 Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or
directly to the handle.
몇
Caution
Immediately switch the appliance off or pull the
power plug if foam forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance imme-
diately and empty the container
.
 Adapt the adapter to the connection di-
ameter of the electric tool using a knife
if necessary.
 Illustration
Plug the enclosed adapter onto the
handle of the suction hose and connect
the electric tool with the connection.
Accessory storage container
Steering roller
Cartridge filter
(already installed in the appliance)
Suction hose with handle
Suction tubes 2 x 0.5 m
Floor nozzle
(with inserts)
Crevice nozzle
Adapter
Operation
Before Startup
Start up
Dry vacuum cleaning
Wet vacuum cleaning
Working with electrical power tools