Kärcher WD 3.600 MP, Original Instructions Manual

Page: 6 / 16

6
English

Pull out to open, push in to lock.
(see description / illustration )
 To rest the floor nozzle during work in-
terruptions.
(see description / illustration )
 The accessories compartment allows
the storage of suction pipes and suction
nozzles on the appliance.
(see description / illustration )

The steering rollers are located in the
compartment when the appliance is de-
livered. These must be attached prior to
starting up the appliance.
(see description / illustration )
 The cartridge filter must always be in-
stalled - with wet and dry vacuuming.
Note : Let the wet cartridge filter dry pri-
or to using it for dry vacuuming.
(see description / illustration )
 Slide the suction hose into the connec-
tion, it will lock into place.
(see description / illustration )
In order to disconnect it, push down
with your thumb and pull the suction
hose out.
 Connect both suction pipes and con-
nect them to the suction hose.
(see description / illustration )

For edges, joints, heaters and hard to
reach locations.
 Use the appropriate insert for vacuum-
ing on hard surfaces and carpets.
(see description / illustration )
Hard surfaces, wet vacuuming : Use
the insert with 2 rubber lips.
Hard surfaces, dry vacuuming : Use
the insert with 2 bristles.
Carpets, wet and dry vacuuming :
Work without an insert.
 To connect the suction hose with an
electric tool.
(see description / illustration )
 Adapt the adapter to the connection di-
ameter of the electric tool using a knife
if necessary.
Container closure
Parking position
Accessory mount
Steering roller
Cartridge filter
(already installed in the appliance)
Suction hose with hand pipe
Suction tubes 2 x 0.5 m
Crevice nozzle
Floor nozzle
(with inserts)
Adapter