background image

7

Safety

Hazard Intensity Level

The following symbols are used throughout this guide as indicated in their descriptions: 

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words 

-WARNING 

and

 CAUTION 

and

 FOR 

SAFETY. 

The level of hazard intensity is determined by the following definitions:

WARNING 

- Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION -

 Hazards or unsafe practices which could result in minor personal injury or product or property 

damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.  

Report 

machine damage or faulty operation immediately.  Do not use the machine if it is not in proper operating condi-
tion. Following is information that signals some potentially dangerous conditions to the operator or the equip-
ment.  Read this information carefully.  Know when these conditions can exist.  Locate all safety devices on the 
machine.  Please take the necessary steps to train the machine operating personnel. 

FOR SAFETY: 

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts.  Do not wear loose clothing; jackets, shirts, or sleeves when working on the 
machine. Use manufacturer approved replacement parts.

 

86394670 - VacPac

Summary of Contents for VP6




























Reviews: