Kärcher Tornado BD, Manual

Page: 11 / 64

English Operating Instructions BR/BD Trike
11
Unloading the unit
Risk of injury!
To stop all functions immediately,
press the red Emergency STOP
pushbutton.
„
Place the long, lateral planks from the
packaging on the pallet and form a ramp.
„
Secure the planks with nails.
„
Support the ramp by placing the shorter
planks underneath.
„
Remove the wooden laths.
„
Raise the cleaning head with the pedal
and lock it.
„
Set key switch to “ I ”.
„
Press ”Direction-of-travel” pushbutton
and slowly run the unit down the ramp.
„
Set key switch back to “ O ”.
Attaching the brushes
BD Trike
Before switching on the unit, the disc
brushes must be attached (see
“Maintenance procedures”).
Attaching the suction bar
„
Unlock the suction bar pedal.
„
Insert the suction bar into the suction-
bar suspension device, ensuring that the
profiled sheet is situated over the
suspension device.
„
Tighten the star knobs.
„
Check that the traction cable functions
correctly.
„
Attach the suction hose.
Operation
Risk of injury!
To stop all functions immediately,
press the red Emergency STOP pushbutton.
Driving
Caution!
Get used to your unit by test-driving
it in an open space.
Drive up/down slopes at low speed only.
Information:
The unit has a projecting brush head
on the right side, ensuring a clear view
when cleaning right up to the edge.
„
Sit on the unit and set the key switch
to “
I ".
„
Set the direction of travel with the
“Direction-of-travel” buttons on the
control panel.
„
Specify the driving speed by depressing
the drive pedal.
„
To stop the unit: release the drive pedal.
!
!
i