background image

English

WARNING 

When using this product basic precau-
tions should always be followed, includ-
ing the following:

Read all the instructions before 
using the product.

Please observe the safety instruc-
tions of your pressure washer.

The T-Racer must not be used by 
children.

Only trigger the gun of the pressure 
washer if the T-Racer is located on 
the surface to be cleaned.

Keep all persons/animals clear of  
the immediate vicinity of the cleaning 
head.

Beware of the recoil force! Ensure a 
stable position and firmly hold the 
trigger gun with the extension han-
dle.

Turn off the pressure washer when 
examing or changing the T-Racer 
and after the completion of the clean-
ing operation.

Maximum water temperature  al-
lowed is 140 °F (60°C). Please follow 
the instructions of your pressure 
washer.

Caution

Do not use on windows.

The T-Racer is not suited for scour-
ing or scrubbing.

Do not run over freestanding cor-
ners.

Always test the T–Racer in an incon-
spicuous area.

Never operate in the same area for 
more than 2 seconds, damage may 
occur.

SAVE THESE INSTRUCTIONS!

When unpacking the product, make 
sure that no accessories are missing 
and that none of the package contents 
have been damaged. If you detect any 
transport damages please contact your 
retailer. 

See page 2, illustration 

1 Housing
2 Handle
3 Bayonet connection with union nut
4 Lower wand
5 Upper wand
6 Rotating nozzle holder
7 Black nozzles (2 pieces)
8 Grey nozzles (2 pieces)

This T-Racer can be used with all Kärcher 
electric pressure washers up to 2000 psi.
Use on 

horizontal surfaces

 like drive-

ways, patios, side walks, etc.
The T-Racer has not been designed for 
commercial use.

Danger!

Keep hands away from moving 
parts.

Safety instructions

Preparing the Appliance

Description of the Appliance

Intended use

Symbols on the appliance

Summary of Contents for T 250 T-Racer

















Reviews: