background image

– 12

Illustration 

Put the extension pipes into the large accessory 
holders.

Insert the manual nozzle and detail nozzle onto 
each extension pipe.

Attach the round brush to the detail nozzle.

Stow power cord into the accessory storage.

Insert the steam hose with the steam gun into the 
floor nozzle.

Hook the floor nozzle into the parking position.

 It is recommended to sweep or vacuum the floor prior 
to using the steam cleaner. This way, the floor is already 
cleared of dirt/loose particles prior to the wet cleaning.

Prior to treatment with the steam cleaner, always check 
the reaction of the textiles in an inconspicuous location: 
Steam at first, then let dry and then check for colour or 
shape changes.

When cleaning painted or plastic-coated surfaces, as 
found on kitchen and living room furniture, doors, par-
quet; wax, furniture polish, plastic surfaces or paint can 
come loose or stains can be created. When cleaning 
these surfaces, briefly steam a cloth and wipe the sur-
faces with it.

ATTENTION

Never direct the steam jet at glued edges as the edge 
band may loosen. Do not use the steam cleaner on un-
sealed wooden or parquet floors.

In case of low outside temperatures, especially in the 
winter, warm up the window pane by slightly steaming 
the entire glass surface. This will prevent tensions on 
the surface which might lead to glass breakage.
Then clean the window surface with the hand nozzle 
and attachment. Use a squeegee to remove the water 
or wipe the surfaces dry. 

ATTENTION

Do not direct steam onto the sealed locations of the win-
dow frame to prevent damage.

You can use the steam gun without any additional ac-
cessories, e.g.:

to remove light wrinkles from hanging clothes by 
steaming them at a distance of 10 to 20 cm.

to remove dust from plants. Here, keep a distance 
of 20-40 cm.

for moist dusting, by briefly steaming the cloth and 
wiping the furniture with it.

The closer this nozzle is to the contaminated area, the 
higher the cleaning effect, as the temperature and the 
steam are highest at the nozzle output. Especially suit-
ed for cleaning difficult access locations, joints, fittings, 
drains, sinks, toilets, blinds and heaters. Heavy lime 
scale can be drenched in vinegar prior to steam-clean-
ing. Let the vinegar penetrate for about 5 minutes.
Illustration 

Slide the spotlight nozzle onto the steam gun.

The round brush can be installed onto the detail nozzle 
as an accessory. Attached brushes can therefore be 
used to remove heavy soiling.

ATTENTION

Not suited for the cleaning of sensitive surfaces.

Illustration 

Attach the round brush to the detail nozzle.

The manual nozzle is used for cleaning small areas that 
can be washed down, shower cubicles and mirrors.
Illustration 

Push the manual nozzle onto the steam gun ac-
cording to the spotlight nozzle.

Pull the cover over the manual nozzle.

The floor nozzle is used for cleaning washable wall and 
floor coverings e.g. stone floors, tiles and PVC floors.

ATTENTION

Damage due to build-up of steam

Heat and moisture can lead to damage. Check the heat 
resistance and steam effect on an inconspicuous area 
using a minimal volume of steam prior to use.

NOTICE

Detergent residue or care emulsions on the surface to 
be cleaned can lead to streaks, which will disappear 
however once these have been used several times.
We recommend sweeping the floor or vacuum cleaning 
it before using the appliance. In this way the floor will be 
cleared of dirt and loose particles before the wet clean-
ing commences. Work slowly on surfaces that are heav-
ily soiled so that the steam can impact longer.
Illustration 

Connect the extension tubes with the steam gun.

Illustration 

Push the floor nozzle onto the extension tube.

Illustration 

Fasten the floor cleaning cloth to the floor nozzle.
Place the floor cleaning cloth with the hook and 
loop strips pointing upwards on the floor.
Place the floor nozzle onto the floor cleaning cloth, 
applying slight pressure. 

The floor cleaning cloth will stick to the floor nozzle of its 
own accord due to the hook and loop fastening.

Storing the Appliance

How to Use the Accessories

Important application instructions

Cleaning floor surfaces

Refreshing textiles

Cleaning of Coated or Lacquered Surfaces

Cleaning of Glass

Steam gun

Detail nozzle

Round brush

Hand nozzle

Floor nozzle

Summary of Contents for SC EasyFix ATK 2

















Reviews: