background image

English

 13

Note: 

Even if you iron without steam, there 

must be water in the boiler.

Adjust the temperature of the iron ac-
cording to the garment you want to iron.

Note:

 Please observe the ironing and 

washing instructions in your garment

.

As soon as the indicator lamp of the 
heater of the iron switches off, you can 
start ironing. 

Danger

Always disconnect the mains plug and al-
low the steam cleaner to cool down before 
performing any maintenance work.

Rinse the steam cleaner boiler at the latest 
after 10 boiler fillings. 

Disconnect the mains plug from the 
socket.

Allow the steam cleaner to cool down.

Empty the water reservoir.

Remove the accessories from the ac-
cessory compartments.

Illustration 

Open the locking door of the accessory 
compartment.

Remove the accessories from the ac-
cessory compartment.

Open the maintenance lock. For this, 
place the open end of an extension pipe 
onto the maintenance lock, lock it into 
the guide and unscrew it.

Fill the boiler with water and shake it 
strongly. This dissolves lime scaling re-
siding on the boiler bottom. 

Completely empty the steam boiler to 
remove existing water (see fig.  ).

As limes cale builds up on the boiler walls, 
we recommend to de scale the boiler in the 
following intervals (RF = reservoir fillings):

Note:

 Please contact your Conservancy 

Board or the local water supply company to 
inquire about the hardness of your water.

Disconnect the mains plug from the 
socket.

Allow the steam cleaner to cool down.

Empty the water reservoir.

Remove the accessories from the ac-
cessory compartments.

Illustration 

Open the locking door of the accessory 
compartment.

Remove the accessories from the ac-
cessory compartment.

Open the maintenance lock. For this, 
place the open end of an extension pipe 
onto the maintenance lock, lock it into 
the guide and unscrew it.

Completely empty the steam boiler to 
remove existing water (see fig.  ).

Warning

Only use products approved by KÄRCHER 
to exclude any damages of the appliance.

User the KÄRCHER decalcifier sticks 
(order no. 6.295-047) to decalcify the 
water. Please follow the dosing instruc-
tions on the packaging while using the 
decalcifying solution.

Caution

Use caution when filling and emptying the 
steam cleaner. The descaling solution can 
have an aggressive effect on delicate sur-
faces.

Pour the descaling solution into the boil-
er and allow it to react for approximately 
8 hours.

Dry ironing

Synthetics

•• Wool, silk
••• Cotton, linen

Maintenance and care

Rinsing the steam boiler

Descaling the steam boiler

Degree of hard-
ness

° dH

mmol/l

RF

I

soft

0-  7  0-1,3

100

II medium

7-14

1,3-2,5

90

III hard

14-21 2,5-3,8

75

IV very hard

>21

>3,8

50

Summary of Contents for SC 4.100 CB



















Reviews: