Kärcher Professional B60/10CB, Operating Instructions Manual

Page: 13 / 55

13
Operations
Pre-Run Inspection
1. Check all fittings and connectors for proper assembly.
2. Check all hoses for leaks. Repair or replace any damaged hoses.
Equipment Set-up
1. Using a clean container, fill the solution tank with clean hot water. The machine is equipped with two fill ports.
A large covered port on the side of the machine and a smaller uncovered port on the top of the machine.
When using the upper fill port, fill only until water reaches the full level mark on tank. Do not use water over
130°F.
2. Mix in cleaning concentrate, following manufacturer’s instructions printed on container.
NOTE: When using a powder cleaner, pre-mix with hot water in a clean container before adding to the solution
tank.
3. Install 3M Easy Trap Strip on scrub pad (Recommended).
• Place the 3M Easy Trap Strip material on top of the white pad so that the edge does not overlap the
squeegee blade. If the 3M Easy Trap Strip material is taken from the bulk roll, be sure to use only 5
segments of material for each application.
• Fold/wrap material over front edge of pad and hook material on the 5 plastic flippers to hold material in
place.
86390990 B60/10C ECO