-
4
1
Time switch
2
Control lamp operating state
green: Emergency-stop switch turned
on
yellow: Cleaning process active
red: Turntable overloaded
3
Heating switch
AUTO: Heater is controlled via the timer
(option)
OFF: Heater off
1/ON: Heater on
4
Indicator lamp - heater
green: Heater released
red: Water shortage
5
Temperature controller
6
Temperature indicator lamp
green: selected temperature reached
yellow: Heater active, selected temper-
ature not reached yet
red: Over temperature (more than 94
°C) temperature limiter was triggered
7
Skimmer switch (option)
AUTO: Skimmer is controlled via the
timer (option)
OFF: Skimmer has been switched off
1/ON: Skimmer is switched on
8
Indicator lamp, skimmer
green: Skimmer is active
m
DANGER
The electrical connection of the system
may only be carried out by a qualified elec-
trician.
For connection values, see technical data
and type plate.
Note:
After connecting the device to the power
supply, check the rotating direction of the
pump motor to see it is running in right di-
rection.
–
The fan of the pump motor must rotate
in the direction of the arrow.
Î
Align the appliance horizontally at the
installation site.
Î
Lock the brakes of the steering rollers.
Î
Ensure that the drain-off tap is closed.
Î
Open the device hood.
Î
Turn on the main switch.
Î
First-time filling: Fill in water into the de-
tergent container until the indicator
lamp "Heater" goes off or lights up
green.
Î
Close cover.
Î
Set the thermostat to the desired clean-
ing temperature (max. 80°C).
Î
Switch on the heating. Heater indicator
lamp glows green.
The indicator lamp for the temperature
lights up yellow during the heating process
and changes to green when the selected
temperature is reached.
Î
Open the device hood.
Î
Add detergent to the detergent contain-
er according to the instructions given in
the product information and start a short
cleaning cycle.
Note:
The device can be operated even before
the selected cleaning temperature has
been reached.
The cleaning process takes place in a fully
automatic mode.
Î
Distribute the parts to be cleaned (max.
130 kg) evenly on the turntable.
Î
Close and lock the appliance cover.
Î
Set the cleaning time at the timer (max.
30 minutes).
The indicator lamp "Operating Status" will
light up yellow. The indicator lamp of the
operating status switches to green at the
end of the selected cleaning period; the
cleaning process is completed.
m
DANGER
Danger of scalding by hot steam! Do not
open the cover at the end of the cleaning
process until the steam has escaped
through the steam exhaust.
Î
Open the device hood.
m
DANGER
Risk of burns! Allow cleaned parts to cool
down adequately before removing them.
Î
Wear safety gloves.
Î
Remove the cleaned parts.
The cleaning process can be interrupted in
3 different ways.
1
Reset timer manually.
2
Switch off the main switch.
3
Open the machine hood (not recom-
mended due to heavy steam).
During longer non-use of the machine it
makes sense to turn the heater switch to
"OFF".
Operating field
Start up
Power connection
Making the plant ready for
operations
Operation
Operation
Interrupting operation
(1
Summary of Contents for PC 60/130 T
Page 2: ... ...
