Kärcher NT 30/1 Tact, Manual

Page: 10 / 40

10 English
20
Filter cover
21
Carrying handle
22
Suction control (variable)
23
Tool adapter (Tact Te only)
24
Push handle (NT 50/1 only)
25
Suction power control (min-max)
(Tact Te only)
26
Turn switch
27
Socket (Tact Te only)
28
Floor nozzle holder
29
Drain hose (NT 50/1 only)
30
Suction pipe holder
31
Cable hook (NT 50/1 only)
32
Angle piece
33
Mains cable
34
Angle piece holder (NT 30/1, NT

40/1 only)
35
Filter frame
36
Flat fold filter (PES)
37
Filter dedusting
38
Type plate
Preparation
1. Unpack the device and install the
accessories.
Illustration B
Initial startup
ATTENTION
Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the flat fold filter when
vacuuming.
Anti-static system
Static charges are discharged through
the earthed connection nozzles. This
prevents sparking and electric shocks
with electrically conducting accesso-
ries (optional).
Dry vacuuming
● When vacuuming fine dust, a fleece
filter or dust bag (special accessory)
can also be used.
Installing the fleece filter bag
1. Unlock and remove the suction
head.
2. Fit the fleece filter bag.
Illustration C
3. Fit and lock the suction head.
Installing the dust bag
1. Unlock and remove the suction
head.
2. Insert the dust bag (special acces-
sories).
Illustration D
3. Pull the dust bag (special accesso-
ries) over the container. Ensure that
the marking line is within the con-
tainer and both ventilation holes are
positioned on the back wall of the
container.
4. Fit and lock the suction head.
Wet vacuum cleaning
Installing the squeegees
1. Remove the brush strip.
Illustration E
2. Install the squeegees.
Removing the fleece filter bag
● The fleece filter bag must always be
removed when vacuuming wet sub-
stances.
1. Unlock and remove the suction
head.
2. Pull the fleece filter bag on the
flange up and out.
Illustration F
3. Seal the fleece filter bag with cap.
4. Fit and lock the suction head.
Removing the dust bag
● The dust bag (special accessories)
must always be removed when vac-
uuming wet substances.
1. Unlock and remove the suction
head.