Kärcher MIC 45 advanced, Manual

Page: 8 / 19

-
6
1 Circulation louvre
2 Rotating knob
 Adjustable air nozzles are mounted on
the seat console and on the front edge
of the dashboard.
 The rotary knob for the lowering speed
is used to adjust the lowering speed of
the front attachment frame.
 During transports, the front attachment
frame can be lifted all the way up and
locked; for this, pull the lever all the way
up.
Note : The lever is used to activate the
hydraulic connection 3 on the right front
(option) when it is in the top position.
The front attachment frame and the front
attachments are controlled via the multi-
function lever.
1 Multifunctional lever
2 Blinker switch
FORWARD: Press the switch to the left
(green diode lights up)
NEUTRAL/STOP: Switch in centre po-
sition (without indicator lamp)
REVERSE: Press the switch to the right
(yellow diode lights up)
3 Yellow diode
4 Green diode
5 Press and hold the yellow switch button
for the second hydraulic function on the
front attachment (e.g. for the V shield's
left/right movement)
6 Switch knob for operation of attach-
ments
7 Drive position preselector
8 Lever for rear work hydraulics
Activate the front lift : The lever for the
mechanical lock must be in the bottom po-
sition.
 Pull the multi-function lever towards
you
: The front attachment frame will
rise.
 Press the multi-functon lever toward
the front
: The front attachment frame
will lower.
For float position:
 Press the multi-function lever all the
way forward and lock it in.
Note : This float position is needed when at-
tachments are guided along the ground
(e.g. snow plow).
 Press the multi-functon lever toward
the side
: The front right hydraulic con-
nection 1 will be activated.
For float position:
 Multi-function lever all the way to the
left.
 Press the multi-functon lever toward
the side and press the yellow switch
knob at the same time
: The front right
hydraulic connection 2 will be activated.
For float position:
 Press the key below the yellow knob on
the multi-function lever; the indicator
lamp for the float position will illuminate.
 Lift the front attachment frame up.
 Pull the lever for the mechanical lock all
the way up.
Note : The front lift is deactivated.

Hydraulic connection 3 is activated.
Rotary knob of lowering speed
Lever for mechanical lock
MIC 45 advanced
Multifunctional lever
Controlling the front attachment frame
Control of hydraulic connection 1
Control of hydraulic connection 2 (op-
tion)
Control of hydraulic connection 3 (op-
tion)
8 EN