Kärcher MC 50, Original Instructions Manual

Page: 10 / 36

-
8
A Control lever 2.PTO connection
B Control lever front power lift
C Control lever AUX 1 connection
D Control lever AUX 2 connection
Note : In connection with the front appli-
ance carrier and the weed broom a mul-
tifunction lever is available instead of
the control lever (optional)
E For working with the suction port
(optional)
Position E1 - suction port not locked
Position E2 - suction port locked
1 Warning lamp for battery charging con-
trol
2 Warning lamp hydraulic oil pressure
3 Warning light coolant temperature
4 Warning lamp oil pressure
5 Indicator lamp for high beams
6 Switch
Position 1: Water coupling front on
Position 0: Water coupling front off
Position 2: Switch on water circulation
system (option)
7 Buttons
Position 1: Work hydraulics Main PTO
on
Position 0: Work hydraulics Main PTO
off
8 Ignition lock
9 On board socket 12 V
10 Setting the motor rpm
11 Operating hours meter for motor
12 Pushbutton with locking mechanism
Work hydraulics Main PTO constantly
on
Function only in connection with locked
parking brake and button 7
13 PTO switch parallel/serial
Front position: Main PTO connections
activated in the front and back
14 Switch-over AUX 2 front/back
15 Pushbutton, controls socket E1
16 Setting speed PTO
A Filament symbol : Pre-heat
B Position STOP: Motor off
C Position 1: Ignition on
D Position 2: Start the engine
Console MIC 34C
A
B
D
E
C
E2
E1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Ignition lock
A B C D
Function control lever A
0 Resting position
1 Attachments connected to 2.PTO
forward, lever snaps in place
2 Attachments connected to 2.PTO re-
verse, lever snaps in place
3 Forward travel direction
Function control lever B
0 Resting position
1 Front power lift is lowered, lever does
not snap in place
Caution
Risk of damage! In this lever position
the upgrade kit (option) can not
evade ground unevenness.
2 The front power lift is lowered and is
in the floating position, working
equipment follows the ground (e.g.
broom), lever snaps in place
3 Front power lift is raised, lever does
not snap in place
4 Forward travel direction
Function control lever C
0 Resting position
1 Attachments connected to AUX 1
towards the front, lever does not
snap in place
2 Attachments connected to AUX 1
towards the rear, lever does not
snap in place
3 Forward travel direction
0
1
2
3
0
1
2
3
10 EN