– 8
Dirty floor cloths can be washed in the washing ma-
chine at 60°C. Do not use any liquid softeners as
this would affect the ability of the cloths to pick up
dirt. You may tumble dry the cloths.
Often, failures have simple causes and you can do the
troubleshooting yourself using the following overview. If
you are in doubt or if the failure is not listed here please
contact the authorized customer service.
Decalcify appliance.
Refill water
The steam button is secured with the child lock.
Push the child lock at the top (steam button un-
locked).
Remove the accessory from the steam nozzle.
Clean the nozzle insert.
Briefly switch on the appliance.
Reattach the accessory to the steam nozzle.
Do not tilt the appliance too much to the side during
cleaning work (max. angle 30°).
Subject to technical modifications!
Care of the Accessories
Troubleshooting
Decreased steam amount
Appliance is decalcified.
Steam decreases during the work / no steam
No water in the water reservoir.
The steam button cannot be pushed.
Steam nozzle is plugged
High water output
Technical specifications
Electrical connection
Voltage
220-240
1~50-60
V
Hz
Protection class
IP X4
Protective class
I
Performance data
Heating output
1200 W
Operating pressure max.
0,3
MPa
Heating time
3
Minutes
Steam volume
Continuous steaming
35
g/min
Steam push max.
80
g/min
Dimensions
Volume
Boiler capacity
250 ml
Filling quantity
200 ml
Length
321 mm
Width
127 mm
Height
186 mm
Weight (without accessories)
1,5
kg
12
EN
