English
KSM 750 BAT/PROFI/USA
20
Screw on the positive-terminal lead
on the battery
Screw on the negative-terminal
lead on the battery
Mounting the batteries
(KSM 750 PROFI)
Loosen battery holder
Loosen battery holder
Place the batteries on the engine
bracket
Screw on battery holder
Note:
When using batteries with a liquid
electrolyte coat the battery terminals
adequately with terminal grease to
protect them from corrosion!
Screw on the positive-terminal lead
on the battery
Screw the connector wire to the
batteries
Screw on the negative-terminal
lead on the battery
Mounting the battery
(KSM 750 USA)
Put battery in the battery box
Secure the battery with a battery
holding strap
Note:
When using batteries with a liquid
electrolyte coat the battery terminals
adequately with terminal grease to
protect them from corrosion!
Screw on the positive-terminal lead
on the battery
Screw on the negative-terminal
lead on the battery
Charging the battery
Always heed safety precautions for
handling batteries!
♦
Charge the battery with the
smallest possible charging current
♦
It is essential to observe the
instructions provided by the
manufacturerer of the charging unit
Pull the battery’s connecting
bushing cap off.
Connect the connecting plug of the
battery charger.
Insert power plug
Switch the battery charger on
BAT fuses
1. Fuse load circuit (50 A)
2. Fuse control circuit (3 A)
Summary of Contents for KSM 750 BAT
Page 14: ...KSM 750 BAT PROFI USA 158...
