![background image](http://html1.mh-extra.com/html/karcher/kmr-1250-b/kmr-1250-b_service-manual_3518271024.webp)
24
Troubleshooting Information
KMR 1250 B, LPG, D
Engine Runs but Machine Fails to Move
Adjust hydrostatic transmission
Starting with serial no. 11482 to serial no. 11882,
the hydrostatic transmission (1) is installed in a
slanted position. As the slant is not adjustable,
engine and transmission drive belts may fail after
a short while.
Starting with serial no. 11883, it is possible to
adjust the incline of the hydrostatic transmission.
To this end, the holding bracket (3) was provided
with an elongated hole.
–
Loosen adjusting bolt (2).
–
Position hydrostatic transmission so that drive
belts run straight in belt pulleys.
–
Securely tighten adjusting bolt and seal with
safety paint (2).
Note:
Retrofitting kit 2.882-530 is available for units
with serial no’s. 11482 through 11883. (Re-
Adjusting hydrostatic transmission
fer to service bulletin no. 2001-042)
1
Hydrostatic transmission
2
Bolt w/ stop nut
3
Holding bracket, hydrostatic transmission
2
2
3
1