![background image](http://html1.mh-extra.com/html/karcher/kmr-1250-b/kmr-1250-b_service-manual_3518271023.webp)
23
KMR 1250 B, LPG, D
Troubleshooting Information
Engine Runs but Machine Fails to Move
Shift lever on transmission
Adjusting drive pedals
Checking drive pedal
REVISED
A linkage connects the drive pedals to the shift
lever (4) on the transmission (1). When the drive
pedals are not actuated, the pull spring (3) al-
ways returns this lever to the center position.
When at the center position, the drive pedals
should be adjusted so that the forward and re-
verse pedals at equal angles from the horizontal.
Two adjusting screws (5 and 6) beneath the drive
pedals limit pedal travel and, at the same time,
determine the max. drive speed (see technical
specifications).
Note:
These limits must be observed especially in
the case of units licensed for road travel.
With the drive pedals at center position and with
the parking brake released, the unit may move
neither forward nor backward.
The drive pedal must travel without jerking or
binding.
Note:
All adjusting screws must be fixed with seal-
ing lacquer.
1
Transmission
2
Drive pedal linkage
3
Pull spring
4
Shift lever
5
Adjusting screw, FWD drive
6
Adjusting screw, REV drive
8
5
6
2
3
4
1