Operating instructions
KM 85/50 W B
English
21
Risk of overturning on too
high gradients!
Danger!
The machine could topple over
when driving and turning on slopes.
—
In direction of travel only
negotiate gradients up to 18 %
—
At right angles to direction of
travel only negotiate gradients up
to 18 %.
For our environment
Caution, danger to the
environment from engine
or hydraulic oil!
Take spent oil after an oil change
to an oil collecting point or a
waste disposal company.
Intended use
—
This sweeper is predominantly
intended for sweeping outside
surfaces.
—
Ít complies with the "L"
application category for non-
health hazardous dusts.
—
It is not intended for use on
public traffic routes
Suitable surfacings:
—
Asphalt
—
Paving stones
—
Screed
—
Concrete
Function description -
sweeping machine
The KM 85/50 W B works according
to the throw-over principle.
—
The side brush (3) cleans corners
and edges of the sweeping
surface and transports the dirt in
the path of the main brush.
—
The rotating main brush (4)
transports the dirt directly into the
debris container (5).
—
The dust swirled up in the
container is separated by way of
the dust filter (1) and the filtered,
clean air removed by the suction
turbine (2).
Machine components
1. Push handle
2. Lever for coarse-dirt flap
3. Unit cover
4. Swivel caster with parking brake
5. Side brush
6. Debris container with transport
rollers
7. Filter shaker for the dust filter
8. Push handle lock
1. Starter rope
2. Raise / lower main brush
3. Elapsed-time meter
4. Lifting/lowering side brush
5. Multifunctional lever
Multifunctional lever
1. Setting "CHOKE" starting aid
2. "HARE" setting – operating speed
3. "0" setting – engine OFF
Before first operating
Unloading instructions
—
The machine was secured on a
pallet with stretch belts or ropes
for safe transport. Proceed as
follows when unloading:
Cut the plastic packing tape and
remove the film
Knock aside the wheel securing
blocks and lift the machine off the
pallet by hand
Warning!
Do not use a fork lifter for unloading;
the machine can be damaged by it.
Tests
Check the engine oil level
See maintenance tasks chapter for
description
Check that the spark plug
connector is tightend securely
See maintenance tasks chapter for
description
Installation
Install push handle with bowden
cable and cover support
See below for description
Mount the side broom
See below for description
