QUICKSTART
5.964-137.0 03/12
Operation
1
A
D
B
E
C
F
Starting the machine
A Sit on the driver's seat.
Do NOT press the accelerator pedal.
B Lock parking brake.
C Bring the direction selector switch into
the middle position.
D Engine speed adjustment - push forward by
1/3.
E Insert the ignition key into the ignition lock.
Turn the ignition key to position "Filament".
Pre-heat lamp glows.
F When the pre-heating lamp goes off, turn the
ignition key to position "II".
If the machine starts, release the ignition key.
Release parking brake.
2
A
D
G
B
E
H
C
F
I
Drive the machine
Caution
Risk of damage. Only use the direction switch
when the machine is standing still.
A Set programme switch to step 1 (driving).
B Move the gas lever all the way to the front
(high speed).
C Press brake pedal and keep it depressed.
D Release parking brake.
Drive forward
E Set the travel direction switch to "forward".
F Press accelerator pedal down slowly.
Reverse drive
Danger
Risk of injury! While reversing, ensure that
there is nobody in the way, ask them to move if
somebody is around.
G Set the travel direction switch to "backwards".
H Press accelerator pedal down slowly.
Brakes
I
Release the accelerator pedal, the machine
brakes automatically and stops.
Note
The braking effect can be supported by pressing
the brake pedal.
3
A
B
Sweeping mode
Sweeping with sweep roller
A Set programme switch to step 2. Roller brush
is lowered.
Sweeping using roller brush and side brushes
B Set programme switch to step 3. Side brush-
es and roller brush are lowered.
4
A
Sweeping damp or wet floors
A Switch off the blower.
