English
7
Î
Disconnect the appliance from the water
supply.
Î
Detach spray lance from the trigger gun.
Î
Briefly switch the appliance on ("I/ON“),
press the trigger gun lever until no further
water is discharged (approx. 1 min).
Î
Switch the appliance switch to "0/OFF“.
Î
Use the safety catch to secure the trigger
gun lever.
Î
Pull out the mains plug.
Î
Store the power cord, the HP hose and the
accessories on the appliance.
Special accessories expand the possibilities
of using your appliance. Please contact your
Kärcher dealer for further information.
To ensure a trouble-free operation of the ap-
pliance and to match the individual cleaning
task, we recommend our Kärcher detergent
and maintenance agents. Please ask for our
advice, or request information on the prod-
ucts.
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
Prior to longer periods of storage, e.g. in the
winter:
Î
Remove filter from suction hose for deter-
gent and clean with running water.
Î
Pull out filter in water connection using
flat-nose pliers and clean with running wa-
ter.
The appliance is maintenance-free.
The appliance and its accessories can get de-
stroyed through frost if there are any water
residues in them. To avoid damage to them:
Î
Store the appliance and the entire acces-
sories in a frost-safe room.
Only use original Kärcher spare parts. You will
find a list of spare parts at the end of this doc-
ument.
You can rectify minor faults yourself with the
help of the following overview.
If in doubt, please consult the authorized cus-
tomer service.
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
Warning
Repair works may only be performed by the
authorized customer service.
Appliance does not start
Î
Check whether the voltage indicated on
the type plate corresponds to the voltage
of the socket.
Î
Check the power cable for damage.
Pressure does not build up in the appli-
ance
Î
Check the setting at the spray lance.
Î
Evacuate air from the appliance: Switch
on the appliance when the HP hose is not
connected and allow it to run until the wa-
ter which discharges from the HP outlet is
free of bubbles. Then connect the HP
hose again.
Î
Clean the filter in the water supply connec-
tion: This can be easily removed using
flat-nose pliers.
Î
Check all supply lines to the HP pump for
leaks or blockages.
Strong pressure fluctuations
Î
Clean the high-pressure nozzle: Remove
dirt and debris from the nozzle bore with a
needle and rinse through with water to-
wards the front.
Î
Check the volume of incoming water.
HP pump leaking
Î
Slight leakage from the HP pump is nor-
mal. If the leakage increases contact the
authorized customer service.
Special accessories
Detergents
Maintenance and care
Cleaning
Maintenance
Frost protection
Spare Parts
Troubleshooting