background image

English

  8

Only use original Kärcher spare parts. You 
will find a list of spare parts at the end of this 
document.

You can rectify minor faults yourself with the 
help of the following overview. 
If in doubt, please consult the authorized 
customer service.

Risk of injury

Always switch off the appliance and pull out 
the mains plug before care and maintenance 
work.

Warning

Repair works may only be performed by the 
authorized customer service.

Machine does not start

"

Check whether the voltage indicated on 
the type plate corresponds to the voltage 
of the socket.

"

Check the power cord for damage.

Pressure does not build up in the appli-
ance

"

Check the setting at the spray lance.

"

Appliance ventilation: Switch on the ap-
pliance without connection the HP hose 
and run it until the water discharging 
from the HP outlet is free of bubbles. 
Switch off appliance and reconnect 
spray lance.

"

Clean the filter in the water supply con-
nection: This can be easily removed us-
ing flat-nose pliers.

"

Check all supply lines to the HP pump for 
leaks or blockages.

Strong pressure fluctuations

"

Clean the high-pressure nozzle: Re-
move dirt and debris from the nozzle 
bore with a needle and rinse through with 
water towards the front. 

"

Check the volume of incoming water. 

HP pump leaking

"

Slight leakage from the HP pump is nor-
mal. If the leakage increases contact the 
authorized customer service.

No detergent infeed

"

Select the low-pressure setting for the 
spray lance.

"

Clean the filter of the detergent suction 
hose.

"

Check the DT suction hose for kinks.

Spare Parts

Troubleshooting

Specifications

Power connection

Voltage (1~50 Hz)

240V

Connection output

1,9kW

Mains fuse (slow-blow)

10A

Protective class

I

Water connection

Max. feed temperature

40°C

Min. feed volume

10l/min

Feed pressure,

0,2 - 1,2MPa

Performance data

Working pressure

12MPa

Max. permissible pressure

13MPa

Water flow rate

6,7l/min

Detergent flow rate

0,3l/min

Recoil force of handgun

18N

Hand-arm vibration (ISO 
5349)

2,2m/s

2

Sound pressure level Lpa 
(EN60704-1)

77dB(A)

Sound power level Lwa 
(2000/14/EG)

92dB(A)

Dimensions

Depth 420mm
Width

445mm

Height

590 - 930mm

Weight

19,5kg

Summary of Contents for KB 4040













Reviews: