background image

English

  6

ter should be used instead (special ac-
cessory, order no. 4.440-238) and 
suspended inside the water butt.

"

Use the Kärcher water filter to protect the 
HP pump and accessories (special ac-
cessories, order no. 4.730-059). This fil-
ter removes dirt from incoming water.

"

Appliance ventilation: Switch on the ap-
pliance without connection the HP hose 
and run it until the water discharging 
from the HP outlet is free of bubbles. 
Switch off appliance and reconnect HP 
hose.

"

Push the appropriate spray lance on to 
the handgun and fasten it by turning it 
through 90°.

"

Open tap.

"

Plug in the main plug.

"

Set main switch to “I/ON”.

"

Press safety catch on the handgun to re-
lease it and pull lever.

Warning

The handgun is subjected to a recoil force 
when the water jet is discharged. Make sure 
that you have a firm footing. Hold the hand-
gun and spray lance firmly.

"

Carrying out the most common cleaning 
tasks.

Operation with detergents is possible 
with low pressure (–)

-

Note

Detergent can only be added when the ap-
pliance is being operated in low pressure 
mode.
All washing brushes supplied by Kärcher are 
designed for use with detergents.

"

Turn Variopower nozzle until lowest 
pressure setting has been reached (–). 

"

Turning the regulator to the left: Deter-
gent is added from the left DT tank.

"

Turning regulator to the right: Detergent 
is added from the right DT tank.

"

During low pressure operation, deter-
gent is automatically sucked in from the 
filled detergent tank.

"

Dosage happens through the DT dosage 
regulator.

1 Spray a small dose of the detergent on 

the dry surface, and allow it to react 
(make sure the detergent does not dry 
up).

2 Wash off the loosened dirt using the 

high-pressure jet.

"

Release the lever on the handgun.

"

During breaks, use the safety catch to 
secure the handgun lever.

"

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the ON/OFF switch.

"

Store the handgun and spray lance in the 
accessory mount.

Start up

High pressure operation

Spray lance with Variopower nozzle

Operation with detergent

DT metering regulator

DT suction infeed from DT tank

Recommended Cleaning Method

Interrupting operation

Summary of Contents for KB 4040













Reviews: