Kärcher K 7 Premium, Manual

Page: 19 / 54

– 8
11 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
12 Storage for spray lance
13 Storage hook for mains connection ca-
ble
14 Mains cable with mains plug
15 Bearing wheel
16 Trigger gun
17 Lock trigger gun
18 Key to detach the high pressure hose
from the trigger gun
19 Spray lance with Dirtblaster
For strong contaminations
20 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the hand spray gun
and turn the spray lance to the desired
position.
21 Delta-Racer D150
The Delta-Racer combines a wash
brush with a rotating high pressure jet.
Therefore, it is especially suited for vehi-
cle cleaning or heavily soiled surfaces.
22 Foam nozzle with detergent container
With powerful foam for effortless clean-
ing.
23 Ultra Foam Cleaner TM 615
Apply the "Ultra Foam Cleaner TM 615"
cleaner via the foam nozzle only.
———————————————––––
Not included in the delivery
24 Plug 'n' Clean detergent bottle with
locking lid
25 Water supply hose
Use a fabric reinforced water hose with
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m.
Illustrations on fold-out
pages!
Mount loose parts delivered with appliance
prior to start-up.
Illustration

Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Illustration

Insert the top holder and push down all
the way.
Illustration

Press in the storage hook and lock it
into the top position.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration

Insert both detergent hoses onto the
hose fittings.

Install the dosage regulator and con-
nect using 2 screws.
Note : During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
Illustration

Wind up the high-pressure hose on the
hose drum.
Illustration

Slide the free end of the coiled high
pressure hose through the recesses on
the dosage regulator.
Illustration

Attach the transport handle, insert the
bolts into the bores and screw them in.
Illustration

Press the connecting fitting from the
short high pressure hose into the brass
Before Startup
Attaching the Accessories
Install the storage for trigger gun
Install the storage hook for the mains
connection cable
Install the dosage regulator for detergent
Install the transport handle
18 EN