![background image](http://html.mh-extra.com/html/karcher/k-7-20-mx/k-7-20-mx_manual_654373017.webp)
English
17
This high-pressure cleaner is suited to work
with the Kärcher suction hose with backflow
valve (Optional accessory, order no. 4.440-
238) to draw in surface water, e.g. from wa-
ter butts or ponds (see specifications for
max. suction height).
Î
Fill the Kärcher suction hose with back-
flow valve with water, screw to water
supply and hang into he water butt.
Î
Separate the high pressure hose from
the high pressure connection point of
the appliance.
Î
Switch the appliance on "I/ON" and op-
erate until the water exits the high-pres-
sure connection without bubbles.
Î
Turn off the appliance "0/OFF".
Caution
Never operate the high-pressure cleaner
when the tap is turned off as dry running will
damage the high-pressure pump.
Î
Connect the high pressure hose to the
high pressure connection of the appli-
ance.
Î
Push the spray lance into the trigger
gun and fasten it by turning it through
90°.
Î
Completely open the water tap.
Î
Insert the mains plug into the socket.
Î
Turn on the appliance “I/ON”.
몇
Danger
The trigger gun is subjected to a recoil force
when the water jet is discharged. Make
sure that you have a firm footing and are
also holding the trigger gun and spray lance
firmly.
Î
Illustration
Unlock the lever on the trigger gun.
Î
Pull on the lever of the trigger gun; the
device will switch on.
Note:
Release the lever of the trigger gun;
the device will switch off again. High pres-
sure remains in the system.
Carrying out the most common cleaning
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".
Î
Release the lever on the trigger gun.
Î
Turn the spray lance to the desired po-
sition.
For particularly dirty items or areas.
Not suitable for use with detergents.
For particularly dirty items or areas.
Not suitable for use with detergents.
Î
Turn the spray lance to the desired po-
sition.
Î
Tighten the safety cover.
Suitable for use with detergents.
We recommend the Kärcher cleaning and
care program that will match the respective
cleaning requirements. Please seek con-
sultation or request information on the sub-
ject.
Î
Use spray lance with pressure regula-
tion (Vario Power).
Î
Turn the spray lance to "Mix" position.
Î
Fill the detergent solution in the deter-
gent tank (observe dosage instructions
on the packaging of the detergent).
Î
Adjust the suction volume of the deter-
gent solution by means of the dosage
regulator for detergents.
- Medium quantity: Central position
- Large quantity: "+" position
- Small quantity: "-" position
Î
Spray the detergent sparingly on the
dry surface and allow it to react, but not
to dry.
Î
Spray off loosened dirt with the high-
pressure ray.
Drawing in water from open reservoirs
Start up
Operation
Spray lance with pressure regulation
Spray lance with dirt blaster
KÄRCHER Twin Jet
Washing brush
Working with detergent
Recommended cleaning method