background image

10 

English

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.

Prior to longer periods of storage, e.g. in 
the winter:
Illustration 

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

The appliance is maintenance free.

Use only original KÄRCHER spare parts. 
You will find a list of spare parts at the end 
of these operating instructions.

You can rectify minor faults yourself with 
the help of the following overview. 
If in doubt, please consult the authorized 
customer service.

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the 
authorized customer service.

Pull on the lever of the trigger gun; the 
device will switch on.

Check whether the voltage indicated on 
the type plate corresponds to the volt-
age of the mains supply.

Check the mains connection cable for 
damages.

Check setting at the spray lance.

Appliance ventilation.
Switch on the appliance without con-
nection the high-pressure hose (max. 2 
minutes) and run it until the water dis-
charging from the high-pressure outlet 
is free of bubbles. Switch off appliance 
and reconnect high-pressure hose.

Check the water supply.

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

Cause: Voltage reduction due to weak 
mains supply or when using an extension 
cable

.

When switching on, first pull the lever of 
the hand spray gun and then switch the 
appliance switch to "I/ON" or "eco".

Clean high-pressure nozzle: Remove 
dirt and debris from the nozzle bore, us-
ing a needle and rinse through with wa-
ter from the front.

Check water flow quantity.

Slight leakage from the appliance pump 
is normal. If the leakage increases con-
tact the authorized customer service.

Rotate the 5-part spray lance (multi-
power) to the low-pressure flat jet posi-
tion.

Check the settings at the dosage regu-
lator for detergent.

Check the detergent suction hose for 
kinks.

Maintenance and care

Care

Maintenance

Spare parts

Troubleshooting

Appliance is not running

Q

Pressure does not build up in the 

appliance

Appliance does not start, motor 

hums

Strong pressure fluctuations

Appliance is leaking

No detergent infeed

Summary of Contents for K 6.800 eco!ogic

















Reviews: