background image

English

 3

Please read and comply 

with these original in-

structions prior to the initial oper-

ation of your appliance and store 

them for later use or subsequent 

owners.

Apart from the notes contained 

herein the general safety provi-

sions and rules for the preven-

tion of accidents of the legislator 

must be observed.

Warnings and notes that are at-

tached on the appliance provide 

important notes for the safe op-

eration.

DANGER

Pointer to immediate danger, 

which leads to severe injuries or 

death.

WARNING

Pointer to a possibly dangerous 

situation, which can lead to se-

vere injuries or death.

CAUTION

Pointer to a possibly dangerous 

situation, which can lead to mi-

nor injuries.

ATTENTION

Pointer to a possibly dangerous 

situation, which can lead to 

property damage.

DANGER

Risk of electric shock.

Never touch the mains plug 

and the socket with wet 

hands.

Check the power cord with 

mains plug for damage prior 

to every use. Immediately 

have damaged power cord 

replaced by an authorised 

customer service / electrician. 

Do not operate an appliance if 

the power cord is damaged.

All current-conducting parts 

in the working area must be 

protected against jet water.

The mains plug and the cou-

pling of an extension cable 

must be watertight and must 

never lie in water. Moreover, 

the coupling may never lie on 

the ground. The use of cable 

reels that ensure that the 

sockets are at least 60 mm 

above the ground is recom-

mended.

Make sure that the power 

cord or extension cable is not 

damaged by running over, 

pinching, dragging or the like. 

Protect the power cords from 

heat, oil, and sharp edges.

Turn off the appliance and re-

move the mains plug prior to 

any care and maintenance 

works.

Repair work and work on the 

electrical components may 

only be performed by an au-

thorised customer service.

Safety instructions

Hazard levels

Electric components

Summary of Contents for K 5 Premium

















Reviews: