background image

English

 7

Note

Detergent can only be added when the ap-
pliance is being operated in low pressure 
mode.
All washing brushes supplied by Kärcher 
are designed for use with detergents.

Î

Use spray lance with pressure regula-
tion (Vario Power).

Î

Turn the spray lance to "Mix" position - 
low pressure.

During low pressure operation, detergent is 
automatically drawn in from the filled deter-
gent tank.

Î

Fill the detergent reservoir with, deter-
gent tablet and water or detergent con-
centrate and water (o

bserve metering 

recommendations on the packaging la-
bel of the detergent).

Î

Adjusting the detergent metering valve.
- Medium quantity: Central position
- Large quantity: "+" position
- Small quantity: "-" position

1 Spray a small dose of the detergent on 

the dry surface, and allow it to react 
(make sure the detergent does not dry 
up).

2 Wash off the loosened dirt using the 

high-pressure jet.

To ensure a trouble-free operation of the 
appliance and to match the individual 
cleaning task, we recommend our Kärcher 
detergent and maintenance agents. Please 
ask for our advice, or request information 
on the products.

Î

Release the lever on the trigger gun.

Î

During breaks, use the safety catch to 
secure the trigger gun lever.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the ON/OFF switch.

Î

If detergent has been added: Suspend 
detergent suction hose in a container 
filled with clear water, switch the appli-
ance on for around 1 minute once the 
spray lance has been removed and 
rinse until water runs clear.

Î

Release the lever on the trigger gun.

Î

Set the appliance switch to "0/OFF“.

Î

Turn off tap.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Î

Disconnect the appliance from the wa-
ter supply.

Î

Detach spray lance from the trigger 
gun.

Î

Switch the appliance on ("I/ON“), press 
the trigger gun lever until no further wa-
ter is discharged (approx. 1 min).

Î

Set the appliance switch to "0/OFF“.

Î

Pull out the mains plug.

Î

Store the coiled power cord above the 
accessories compartment.

Î

Use the safety catch to secure the trig-
ger gun lever.

Î

Roll the high pressure hose on to the 
hose drum: Pull out the hose drum han-
dle, turn it clockwise then retract the 
handle.

Î

Store the handgun and spray lance in 
the accessory mount.

Note

Please remove the detergent from the de-
tergent tank if the application is transported 
in a reclined position.

Operation with detergent

Detergent infeed from detergent tank

Recommended Cleaning Method

Detergents

Interrupting operation

Finish operation

Transport

Summary of Contents for K 5.86 M













Reviews: