8
English
STEP 7:
Slide the retention clip on the reel (as
indicated by “1” below) then com-
pletely push the high pressure hose
in (as indicated by “2” below) until
you hear a click.
Tug on the hose before proceeding
to make sure it is securely installed.
It should not come loose when you
tug on it.
STEP 8:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
This pressure washer has been tested
by Kärcher's quality assurance team. A
small amount of water may be present in
the water inlet or outlet. This is normal
and will not affect the performance of the
pressure washer.
STEP 1:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 2:
Install the supplied connector to the
unit’s water inlet.
Note
: Never attach the garden hose
connector to the unit’s water inlet!
Install high pressure hose to hose
drum
Connect the high pressure hose to
the trigger gun
OPERATING INSTRUCTIONS
