Kärcher K 4 My Karcher, Manual

Page: 22 / 52

– 11
Mount loose parts delivered with appliance prior to start-
up.
Illustrations on fold-out page!

Illustration
Screw the coupling element to the water connec-
tion on the appliance.

Park the appliance laying down (horizontal) on an
even surface.

Illustration
Push the high pressure hose into the trigger gun
until it locks audibly.
Note: Make sure the connection nipple is aligned
correctly.

Check the secure connection by pulling on the high
pressure hose.

Illustration
Push the high pressure hose into the quick cou-
pling until it locks audibly.

Insert the mains plug into the socket.
For connection values, see type plate/technical data.
ATTENTION
Impurities in the water can damage the high-pressure
pump and the accessories. For protection, the use of
the KÄRCHER water filter (optional accessory, order
no. 4.730-059) is recommended.
Observe regulations of water supplier.
ATTENTION
Hose couplings made of metal with aquastop can dam-
age the pump! Please use plastic couplings or KÄRCH-
ER brass couplings.

Illustration
Attach the water supply hose to the coupling on the
water connection.

Connect the water supply hose to the water supply.

Completely open the water tap.
This high-pressure cleaner is suited to work with the
KÄRCHER suction hose with backflow valve (Optional
accessory, order no. 2.643-100) to draw in surface wa-
ter, e.g. from water butts or ponds (see specifications for
max. suction height).

Remove coupling from the water connection.

Fill the suction hose with water.

Screw the suction hose into the water connection of
the appliance and insert it into the water source
(e.g. rainwater drum).
Remove air from appliance before operation.

Turn on the appliance “I/ON”.

Unlock the lever on the trigger gun.

Pull on the lever of the trigger gun; the device will
switch on.

Switch the appliance on for a (max. of 2 minutes)
and wait until the water exits at the hand spray gun
without bubbles.

Release the lever on the trigger gun.
Note: Release the lever of the trigger gun; the de-
vice will switch off again. High pressure remains in
the system.

Lock the lever on the trigger gun.
Foam nozzles and cleaners
Foam nozzle with detergent
container FJ 6 2.643-147.0
Foam nozzle with detergent
container FJ 10 2.642-897.0
Foam nozzle with detergent con
Ultra Foam Cleaner (1 l) 2.643-142.0
RM 806 5 l 6.295-504.0
Ultra Foam Cleaner 1 l 6.295-744.0
Accessories for cleaning surfaces
Washing brush 2.643-236.0
Vario joint 2.640-733.0
Sand- / wet-blasting kit 2.638-792.0
Pipe cleaning kit 2.637-767.0
T-Racer T 350 2.643-252.0
T-Racer T 450 2.643-214.0
T-Racer
Т
550 2.643-251.0
Power Brush WB 150 2.643-237.0
Vileda 9.605-680.0
High pressure hose
High-pressure extension hose 10 m 2.641-710.0
PremiumFlex TM high pressure
hose
6 m 6.396-301.0
High pressure hose 9 m 2.641-721.0
High pressure hose 12 m 6.391-785.0
Assembly
Start up
Water supply
Water supply from mains
Drawing in water from open reservoirs
21 EN