background image

16 

English

No detergent.

Detergent siphon tube not 
properly connected to the ma-
chine. 

Check connection.

Detergent is too thick.

Dilute detergent, for best re-
sults use Kärcher detergent.

Filter on detergent siphon tube 
is clogged.

Run warm water through filter 
to remove debris.

Damaged or clogged deter-
gent siphon tube.

Remove obstruction or replace 
detergent siphon tube.

Spray wand is in high-pres-
sure position.

Turn spray wand tip to low-
pressure position.

Discharge nozzle is obstruct-
ed.

Blow out or remove debris with 
fine needle.

Garden hose con-
nection leaks.

Loose fittings.

Tighten fittings.

Missing/worn rubber washer. Insert new washer.

Spray wand leaks. Spray wand not properly at-

tached.

Insert the spray wand into the 
trigger gun. Carefully press in 
against the spring tension and 
twist into the locked position.

Broken o-ring or plastic insert. Call Customer Support

Pump is noisy.

Pump is sucking air.

Check that hoses and fittings 
are air tight. Turn off machine 
and purge pump by squeezing 
trigger gun until a steady flow 
of water emerges through the 
nozzle.

Water leaks from 
pump (up to 10 
drops per minute is 
permissible).

Loose fittings.

Check that all fittings are tight.

Water seals are damaged or 
worn.

Call Customer Support

Oil drip.

Oil seals are damaged or 
worn.

Call Customer Support

Issue

Cause

Solution

If you encounter any additional difficulties not listed, please visit our website.

USA / Canada:

www.karcher-help.com

Mexico:

www.karcher.com.mx

Summary of Contents for K 3

















Reviews: