background image

12 

English

CAUTION

Before cleaning any surface an in-
conspicuous area should be cleaned 
to test spray pattern and distance for 
maximum cleaning results.

If painted surfaces are peeling or 
chipping, use extreme caution as 
pressure washer may remove the 
loose paint from the surface.

When using on surfaces which might 
come in contact with food, flush sur-
faces with plenty of drinking water.

For additional cleaning tips and a 
complete video library, visit our web-
site:

www.karcherresidential.com

(with or without detergent)

. Pre-rinse 

deck and surrounding area with fresh 
water. If using detergent, apply to sur-
face at low pressure. For best results, 
limit your work area to smaller sections 
of approximately 2.3 m² (25 sq. ft.). Al-
low detergent to remain on surface 1-3 
minutes. Do not allow detergent to dry 
on surface. Rinse at high-pressure in a 
long sweeping motion keeping the spray 
nozzle approximately 7.5-15 cm (3-6 in.) 
from the cleaning surface. Always clean 
from top to bottom and from left to right. 
When moving on to a new section of the 
cleaning surface, be sure to overlap the 
previous section to eliminate stop marks 
and ensure a more even cleaning result. 

(with or without detergent). 

Pre-rinse 

cleaning surface with fresh water. If us-
ing detergent, apply to surface at low 
pressure (for best results, limit your 
work area to sections of approximately 
1.8 m (6 ft.) and always apply detergent 

from bottom to top). Allow detergent to 
remain on surface 1-3 minutes. Do not 
allow detergent to dry on surface, if sur-
face appears to be drying, simply wet 
down surface with fresh water. If need-
ed, use special wash brush attachment 
(not included) to remove stubborn dirt. 
Rinse at high-pressure from top to bot-
tom in an even sweeping motion keep-
ing the spray nozzle approximately 
1.8 m (6 ft.) from the cleaning surface. 

(with or without detergent).

 Pre-rinse 

cleaning surface with fresh water. If us-
ing detergent or Degreaser, apply to 
surface at low pressure. For best re-
sults, limit your work area to smaller sec-
tions of approximately 2.3 m² (25 sq. ft.). 
Allow detergent or Degreaser to remain 
on surface 1-3 minutes. Do not allow de-
tergent to dry on surface. Rinse at high-
pressure in a sweeping motion keeping 
the spray nozzle approximately 7.5-
15 cm (3-6 in.) from the cleaning sur-
face. Always clean from top to bottom 
and from left to right. For removing ex-
tremely stubborn stains, use the 
Dirtblaster

 ®

 Nozzle.

(with or without detergent).

 Pre-rinse 

vehicle with fresh water. If using deter-
gent, apply to surface at low pressure. 
For best results, clean one side of vehi-
cle at a time and always apply detergent 
from bottom to top, do not allow deter-
gent to dry on surface. If needed, use 
special wash brush attachment (not in-
cluded) to remove stubborn dirt. Rinse 
at high-pressure in a sweeping motion 
keeping the spray nozzle approximately 
15-20 cm (6-8 in.) from the cleaning sur-
face (distance should increase when 
rinsing pin-striping or other sensitive 

CLEANING TIPS

Deck Cleaning

House Siding

Cement Patios, Brick and Stone

Cars, Boats and Motorcycles

Summary of Contents for K 3

















Reviews: