Kärcher K 3 Plus HR, Manual

Page: 16 / 46

Mount loose parts delivered with appliance
prior to start-up.
See fold-out page 3 for illustrations
Illustration

Screw the coupling element to the wa-
ter connection on the appliance.
Illustration

Connect high pressure hose to trigger
gun.

Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
Illustration

Screw the supplied hose coupling on to
the end of your water supply hose.

Park the appliance on an even surface.
Illustration

Connect the high pressure hose to the
high pressure connection of the appli-
ance.

Insert the mains plug into the socket.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.

Attach the water supply hose to the
coupling on the water connection.

Connect the water supply hose to the
water supply.

Completely open the water tap.
Environmental protection
The packaging material can be recy-
cled. Please arrange for the environ-
mentally appropriate disposal of the
packaging.
Old appliances contain valuable recy-
clable materials that should be recy-
cled properly. Please arrange for the
environmentally appropriate disposal
of the old devices.
Electrical and electronic devices of-
ten contain components which could
potentially pose a danger to human
health and the environment if handled
or disposed of incorrectly. However,
these components are necessary for
the proper operation of the device.
Devices marked with this symbol
must not be disposed of with regular
household rubbish.
Cleaning operations which produce
oily waste water, e.g. engine washes,
underbody washes, may only be car-
ried out using washing stations
equipped with an oil separator.
Work with detergents must only be
performed on liquid-tight work surfac-
es with a connection to the sewer
system. Do not let release detergent
into waters or earth.
Assembly
Start up
Water supply from mains
English
1
6
A
D
Illustration
C
B
E
F

Insert the transport wheels and lock
them.
Illustration

Insert the transport handle and screw in.