6
English
valve (Optional accessory, order no. 4.440-
238) to draw in surface water, e.g. from water
butts or ponds (see specifications for max.
suction height).
Î
Fill the Kärcher suction hose with backflow
valve with water, screw to water supply
and hang into he water butt.
Î
Separate the high pressure hose from the
high pressure connection point of the ap-
pliance.
Î
Switch the appliance on "I/ON" and oper-
ate until the water exits the high-pressure
connection without bubbles.
Î
Turn off the appliance "0/OFF".
Caution
Never operate the high-pressure cleaner
when the tap is turned off as dry running will
damage the high-pressure pump.
Illustration
Î
Connect the high pressure hose to the
high pressure connection of the appli-
ance.
Illustration
Î
Push the spray lance into the trigger gun
and fasten it by turning it through 90°.
Illustration
Î
Completely open the water tap.
Î
Insert the mains plug into the socket.
Illustration
Î
Turn on the appliance “I/ON”.
몇
Danger
The trigger gun is subjected to a recoil force
when the water jet is discharged. Make sure
that you have a firm footing and are also hold-
ing the trigger gun and spray lance firmly.
Î
Unlock the lever on the trigger gun.
Î
Pull on the lever of the trigger gun; the de-
vice will switch on.
Note:
Release the lever of the trigger gun; the
device will switch off again. High pressure re-
mains in the system.
Carrying out the most common cleaning
tasks. The work pressure can be stagelessly
regulated between "Min" and "Max".
Î
Release the lever on the trigger gun.
Î
Turn the spray lance to the desired posi-
tion.
For particularly dirty items or areas.
Not suitable for use with detergents.
Suitable for use with detergents.
We recommend the Kärcher cleaning and
care program that will match the respective
cleaning requirements. Please seek consulta-
tion or request information on the subject.
Î
Use spray lance with pressure regulation
(Vario Power).
Illustration
Î
Turn the spray lance to "Mix" position - low
pressure.
Illustration
Î
Pull detergent suction hose as far as is re-
quired out of the housing.
Î
Suspend end of detergent suction hose in
a container filled with detergent.
Î
Spray the detergent sparingly on the dry
surface and allow it to react, but not to dry.
Î
Spray off loosened dirt with the high-pres-
sure ray.
Î
Release the lever on the trigger gun.
Î
Lock the lever on the trigger gun.
Î
During longer breaks (more than 5 min-
utes), also turn the appliance off using the
"0/OFF" switch.
Î
Insert the trigger gun in its holder.
Start up
Operation
Spray lance with pressure regulation
Spray lance with dirt blaster
Washing brush
Operation with detergent
Recommended cleaning method
Interrupting operation
