background image

English

 9

Caution

Protect the appliance and its accessories 
against frost.

The appliance and its accessories can get 
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to 
them:

Completely drain all water from the ap-
pliance: Switch the appliance on with 
detached high-pressure hose and de-
tached water supply (max. 1 minute) 
and wait, until no more water exits at the 
high-pressure connection. Turn off the 
appliance.

Store the appliance and the entire ac-
cessories in a frost-safe room.

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.

Prior to longer periods of storage, e.g. in 
the winter:

Remove filter from suction hose for de-
tergent and clean under running water.

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

The appliance is maintenance-free.

Use only original KÄRCHER spare parts. 
You will find a list of spare parts at the end 
of these operating instructions.

You can rectify minor faults yourself with 
the help of the following overview. 
If in doubt, please consult the authorized 
customer service.

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the 
authorized customer service.

Pull on the lever of the trigger gun; the 
device will switch on.

Check whether the voltage indicated on 
the type plate corresponds to the volt-
age of the mains supply.

Check the mains connection cable for 
damages.

Check setting at the spray lance.

Appliance ventilation: Switch the appli-
ance on with the high-pressure hose 
detached and operate (max. 2 minutes) 
until the water exits the high-pressure 
connection without bubbles. Switch off 
appliance and reconnect high-pressure 
hose.

Check the water supply.

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

Suction height of 0.5 m when vacuum-
ing from open container has been ex-
ceeded.

Cause: Voltage reduction due to weak 
mains supply or when using an extension 
cable

.

When switching on, first pull the lever of 
the hand spray gun and then switch the 
appliance switch to "I/ON" or "eco".

Frost protection

Maintenance and care

Care

Maintenance

Spare parts

Troubleshooting

Appliance is not running

Pressure does not build up in the 
appliance

Appliance does not start, motor hums

Summary of Contents for K 3.800 eco!ogic













Reviews: