background image

English

Use spray lance with pressure regula-
tion (Vario Power).

Turn the spray lance to "Mix" position.

Note:

 This will mix the detergent with 

the water stream.

Note

: If required, the washing brushes can 

be used to work with detergent.

Spray the detergent sparingly on the 
dry surface and allow it to react, but not 
to dry.

The Dirtblaster reaches its maximum 
cleaning performance in standard 
mode..

Release the lever on the trigger gun.

Lock the lever on the trigger gun.

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

Insert the trigger gun in its holder.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

After working with detergent, suspend 
detergent suction hose in a container 
filled with clear water, switch the appli-
ance on for around 1 minute once the 
spray lance has been removed and 
rinse until water runs clear.

Release the lever on the trigger gun.

Turn off the appliance "0/OFF".

Turn off tap.

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Detach the appliance from the water 
supply.

Caution

When disconnecting the supply or high 
pressure hose, hot water may leak from 
the connections after operation. 

Lock the lever on the trigger gun.

Pull out the mains plug.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Illustration 

To push the appliance, the transport 
handle must be pulled all the way up; it 
will lock into place audibly.

Pull the appliance by its transport han-
dle.

Lift appliance by the carrying handle 
and carry it.

Secure the appliance against shifting 
and tipping over.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
when selecting a storage location for it (see 
Specifications).

Park the machine on an even surface.

Press the disconnect on the hand spray 
gun and remove the high pressure hose 
from the hand spray gun.

Push the casing of the quick coupling 
for the high pressure hose toward the 
rear and disconnect the high pressure 
hose from the appliance.

Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.

Prior to extended storage periods, as dur-
ing the winter, also observe the instructions 
in the Care section.

Recommended cleaning method

Interrupting operation

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Storage

Storing the Appliance

Summary of Contents for K 3.800 eco!ogic













Reviews: