background image

English

 7

For particularly dirty items or areas.
Not suitable for use with detergents.

Carrying out the most common cleaning 
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".

Î

Release the lever on the trigger gun. 

Î

Turn the spray lance to the desired po-
sition.

Suitable for use with detergents.

Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were 
specifically developped for your appliance. 
The use of other detergents and care prod-
ucts may lead to premature wear and can 
invalidate your warranty claims. Please ob-
tain information at your local dealer or re-
quest information directly from KÄRCHER.

Î

Fill the detergent solution in the deter-
gent tank (observe dosage instructions 
on the packaging of the detergent).

Î

Use spray lance with pressure regula-
tion (Vario Power).

Î

Turn the spray lance to "Mix" position.

Note:

 This will mix the detergent with 

the water stream.

Î

Spray the detergent sparingly on the 
dry surface and allow it to react, but not 
to dry.

Î

Spray off loosened dirt with the high-
pressure jet.

Î

Release the lever on the trigger gun.

Î

Lock the lever on the trigger gun.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

Î

After operation with detergent: Fill the 
detergent tank with clear water, turn the 
spray lance with pressure regulator to 
the position "Mix", switch the appliance 
on for about 1 minute and rinse with 
clear water.

Î

Release the lever on the trigger gun.

Î

Turn off the appliance "0/OFF".

Î

Turn off tap.

Î

Detach the appliance from the water 
supply.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Î

Lock the lever on the trigger gun.

Î

Pull out the mains plug.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Î

Pull the appliance by its transport han-
dle.

Î

Empty detergent tank.

Î

Secure the appliance against shifting 
and tipping over.

Spray lance with Dirtblaster

Spray lance with pressure regulation

Washing brush

Working with detergent

Recommended cleaning method

Interrupting operation

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Summary of Contents for K 3.150













Reviews: