background image

English

 7

Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were 
specifically developped for your appliance. 
The use of other detergents and care prod-
ucts may lead to premature wear and can 
invalidate your warranty claims. Please ob-
tain information at your local dealer or re-
quest information directly from KÄRCHER.

Î

Pull detergent suction hose as far as is 
required out of the housing.

Î

Suspend end of detergent suction hose 
in a container filled with detergent.

Î

Detach spray lance from the trigger 
gun. Work only with the trigger gun.

Note:

 This will mix the detergent with 

the water stream.

Î

Spray the detergent sparingly on the 
dry surface and allow it to react, but not 
to dry.

Î

Spray off loosened dirt with the high-
pressure jet.

Î

Release the lever on the trigger gun.

Î

Lock the lever on the trigger gun.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

Î

After working with detergent, suspend 
detergent suction hose in a container 
filled with clear water, switch the appli-
ance on for around 1 minute once the 
spray lance has been removed and 
rinse until water runs clear.

Î

Release the lever on the trigger gun.

Î

Turn off the appliance "0/OFF".

Î

Turn off tap.

Î

Detach the appliance from the water 
supply.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Î

Lock the lever on the trigger gun.

Î

Pull out the mains plug.

Î

Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.

Î

Insert the trigger gun in its holder.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Î

Pull the appliance by its transport han-
dle.

Î

Empty detergent tank.

Î

Secure the appliance against shifting 
and tipping over.

Working with detergent

Recommended cleaning method

Interrupting operation

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Summary of Contents for K 2.97 M













Reviews: