background image

6

For lower pressure turn wand tip
to the 

low pressure setting

 (

).

This wand features a 0º pencil jet which
rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance up
to 50%. This wand combines the cleaning
performance of a 0º pencil jet with the surface
coverage of a wide angle nozzle. Not
recommended for soft materials, siding,
painted surfaces, decks or autos

.

GFCI  INSTRUCTIONS

USING THE ACCESSORIES

Note:
The actual
appearance
of the GFCI
may be
different
from this
illustration.

Step 1 Plug the Ground Fault Circuit
Interrupter (GFCI) into a working outlet

Step 2   Press “TEST”, then press “RESET”
to assure proper connection to power.

The High/low spray wand allows you to adjust
the cleaning pressure. To clean at maximum
pressure, the High/low wand must be
positioned to the high pressure setting (

 ).

To apply detergent, the wand must be
positioned to the low pressure setting (

).

Dirtblaster

®

 spray wand

High/low spray wand

Warning

TO AVOID SERIOUS INJURY,
NEVER POINT SPRAY NOZZLE
 AT YOURSELF, OTHER
PERSONS OR ANIMALS

For higher pressure turn wand
tip to the 

high pressure

setting

 (

 

).

Summary of Contents for K 2.40













Reviews: