6
English
Screwdriver, small size
(not supplied)
for connecting high pressure hose and
trigger gun.
STEP 1:
Insert wheels into the body of the
unit.
STEP 2:
Slide the trigger gun holder into track
on the side of the pressure washer.
STEP 3:
Slide the transport handle into place.
STEP 4:
Install the supplied connector to the
unit’s water inlet.
Note
: Never attach the garden hose
connector to the unit’s water inlet!
STEP 5:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect
:
Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
ASSEMBLY INSTRUCTIONS
Required tools
Assembly
OPERATING
INSTRUCTIONS
Summary of Contents for K 2.27
