Kärcher K 2.100, Operating Instructions Manual

Page: 7 / 12

English 7
For normal cleaning tasks.
Not suitable for use with detergents.
Carrying out the most common cleaning
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max". You
can add detergent when "Mix" is selected.
 Release the lever on the trigger gun.
Illustration

Turn the spray pipe to the desired posi-
tion.
Suitable for use with detergents.
Suitable for use with detergents.
The rotating washing brush is ideally suited
for the cleaning of vehicles.
Caution
Please make sure that the washing brush is
free from dirt or other particles. Otherwise,
it may damage the paint work.
Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were
specifically developed for your appliance.
The use of other detergents and care prod-
ucts may lead to premature wear and can
invalidate your warranty claims. Please ob-
tain information at your local dealer or re-
quest information directly from KÄRCHER.
 Pull detergent suction hose as far as is
required out of the housing.
 Suspend end of detergent suction hose
in a container filled with detergent.
 Detach spray lance from the trigger
gun. Work only with the trigger gun.
Note: This will mix the detergent with
the water stream.
 Spray the detergent sparingly on the
dry surface and allow it to react, but not
to dry.

Spray off loosened dirt with the high-
pressure jet.
 Release the lever on the trigger gun.
 Illustration
Lock the lever on the trigger gun.
 During longer breaks (more than 5 min-
utes), also turn the appliance off using
the "0/OFF" switch.
 Insert the trigger gun in its holder.
Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there
is no pressure in the system.
 After operation with detergent: Run the
machine for approximately 1 minute for
a clear rinse.
 Release the lever on the trigger gun.
 Turn off the appliance "0/OFF".
 Turn off tap.
 Press the lever on the trigger gun to re-
lease any remaining pressure in the
system.
 Detach the appliance from the water
supply.
 Illustration
Lock the lever on the trigger gun.

Pull out the mains plug.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
during transport (see Specifications).
 Lift appliance by the carrying handle
and carry it.
 Secure the appliance against shifting
and tipping over.
Spray lance with high pressure nozzle
Spray lance with pressure regulation
(Vario Power)
Washing brush
Rotary washing brush
Working with detergent
Recommended cleaning method
Interrupting operation
Finish operation
Transport
When transporting by hand
When transporting in vehicles