![background image](http://html1.mh-extra.com/html/karcher/k-2-01/k-2-01_manual_4244007015.webp)
English
15
If you encounter any additional difficul-
ties not listed, please call for help or visit
our website.
Call:
1-800-537-4129
for help
or visit our website:
www.karcher-canada.com
No detergent.
Detergent suction tube not
properly connected to the
machine.
Check connection.
Detergent is too thick.
Dilute detergent, for best
results use Kärcher detergent.
Filter on detergent suction tube
is clogged.
Run warm water through filter
to remove debris.
Damaged or clogged detergent
suction tube.
Remove obstruction or replace
detergent suction tube.
Spray wand is in high pressure
position.
Turn spray wand tip to low
pressure position.
Discharge nozzle is obstructed. Blow out or remove debris with
fine needle.
Garden hose
connection leaks.
Loose fittings.
Tighten fittings.
Missing/worn rubber washer.
Insert new washer.
Spray wand leaks.
Spray wand not properly
attached.
Insert the spray wand into the
trigger gun. Carefully press in
against the spring tension and
twist into the locked position.
Broken o-ring or plastic insert.
Call service center.
Pump is noisy.
Pump is sucking air.
Check that hoses and fittings
are air tight. Turn off machine
and purge pump by squeezing
trigger gun until a steady flow of
water emerges through the
nozzle.
Water leaks from
pump (up to 10 drops
per minute is permis-
sible).
Loose fittings.
Check that all fittings are tight.
Water seals are damaged or
worn.
Call service center.
Oil Drip.
Oil seals are damaged or worn. Call service center.
Symptom
Cause
Solution
Kärcher Customer Service CDN
Summary of Contents for K 2.01
Page 16: ...16 English Notes...
Page 32: ...16 Fran ais Notice...