– 5
Note:
Water based cooling lubricants can
cause a bacterial contamination. Wear ap-
propriate protective gear during the remov-
al.
Empty the container.
Remove deposits from the container.
Dispose of deposits in accordance with
the applicable regulations.
Free the retaining plates from chips and
deposits.
Switch off the appliance using the On/
Off switch.
Empty and clean the container.
Clean drum pump.
Dismantle the accessory and rinse it
with water and let dry if necessary.
Note:
Empty the vacuum cleaner after
each use and let it dry with the container
open.
몇
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
몇
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Rinse the appliance and the accesso-
ries with fresh water at regular intervals
and let them dry.
In order to avoid bacterial contamina-
tion, do not leave fluids inside the de-
vice.
During extended operation breaks,
open the cover to let the residual mois-
ture escape.
Loosen the screw connection on the
clamping rings.
Remove baffle plate.
Remove and replace filter.
Insert new filter.
Fit and tightly screw down clamping
rings.
Note:
During installation, it must me en-
sured that the filter is inserted correctly.
Clean the container
Shutting down
Transport
Storage
Care and maintenance
Replacing the filter
15
EN
Summary of Contents for IVR-L 100/24-2 Me
Page 2: ...2 ...