Kärcher IV 60/27-1 M B1, Original Instructions Manual

Page: 9 / 24

– 8
 Dispose of the used filter in the closed,
dust-proof bag in accordance with legal
requirements.
 Remove the dirt that has accumulated
on the pure air side.
 Insert and secure the new filter in the re-
verse sequence of steps.

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.

DANGER
Have all checks and works on electrical
parts performed by an expert.
Note: In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
No electrical voltage.
 Check the receptacle and the fuse of
the power supply.
 Check the power cable and the power
plug of the device.
Protective motor switch was triggered.
 Reset switch.
Filter, nozzle, suction hose or suction pipe
may be blocked.
 Check, clean accessories. Clean filter.
Filter has not been fastened correctly or is
defective.
 Check to see if filter is sitting properly;
replace if required.
Filter is blocked.
 Switch off the appliance, clean the filter.
The mains plug is plugged in and the mains
voltage is applied.
 Suction turbine rotates in the wrong di-
rection; interchange poles at the plug.
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
Troubleshooting
Motor (suction turbine) does not
start
Suction capacity decreases slowly
Dust comes out while vacuuming
Pressure gauge indicates improper
pressure
Fault indicator IV 60/30 M B1
Indicator lamp "mains voltage" is on
Indicator lamp "direction of rotation
incorrect" is on
Customer Service
Warranty
21 EN