715-721 • HDS-NG LP • 9.800-160.0 • Rev. 4/10
OPERATOR’S MANUAL
PRESSURE WASHER
12
98001600-4
ASSEMBLY INSTRUCTIONS
STEP 1: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
STEP 2: Unscrew guard from
wand. Place pressure nozzle and
o-ring as shown. Screw guard over
nozzle onto wand.
STEP 3: Connect the high pressure
hose to the pump discharge fitting.
STEP 4: Connect garden hose to
the cold water source.
STEP 5: Check inlet filters, re-
move debris, then connect the
garden hose to pump water inlet.
CAUTION: Do not run the pump
without water or pump damage
will result.
Safety
Latch
Spray
Gun
High Pressure
Hose
Guard
Wand
O-Ring
Cold
Water
Source
Garden
Hose
Water Inlet
Garden
Hose
Discharge
Fitting
High
Pressure
Hose
Pressure
Nozzle
STEP 6: Have an electrician con-
nect power supply into junction box
according to information shown on
the serial plate before turning gas
valve dial to “PILOT” position.